Compare fabric coating and lamination, understand how each affects hand and stretch, and learn what to check before approving a textile sample.

Two fabrics can have the same sheen yet behave very differently when cut and sewn. Coating applies a material to a fabric surface to change its appearance or feel. Lamination bonds the fabric to a separate layer, such as another textile, a film or a membrane. Start by describing what the finished product needs to do.
For a satin sheen or a leather-like face, evaluate a coated sample. Colour, surface texture and drape can change together. A coated fabric may feel soft in a small swatch yet hang quite differently from the shoulder of a jacket. Look at the sample hanging freely and then folded.
Consider lamination when a face fabric needs a bonded textile backing or a particular membrane. Fibre composition, direction of stretch, the bonding system and the finished weight all affect the choice. If you require water resistance, specify the target and test method. Results for the fabric sample need to be assessed separately from the seams and joins in a finished garment.
Put untreated and finished samples next to each other. Look at the face flat, then bend it and, where relevant, stretch it gently in the direction used in the product. Check hand and recovery in both fabric directions. Record crease marks, whitening or scratches on a coating, and check the cut edge and fold for lifting in a laminate. Sew a sample seam for an item that will be stitched. Repeat the checks after the intended care cycle and compare the result with the approved reference.
For a lamination quote, identify the face and backing, the stretch direction and the intended care. Compare quotes for the same layer construction and usable width. Check the cut edge, fold and any seam on the approval sample. For laminated apparel fabrics, ASTM D2724 is an example of a bond strength test before or after care. Agree the relevant conditions and acceptance limit with the laboratory.
Share the fibre blend, construction, weight, usable width and order length. A piece of the actual fabric is helpful alongside a visual reference. Include the desired face and reverse, care conditions and any test targets. See our fabric coating and lamination services or contact Ünlü Group about a sample.
Technical references include Trelleborg’s coating processes and Trans-Textil’s introduction to lamination.
phone: +90 212 576 5250
fax: +90 212 493 0336
email: info@unlutransfer.com
Yenidoğan Mah. Eser Sok. No: 6-8
Bayrampaşa, 34030,
Istanbul / Turkey
TR 9150171175
Bayrampaşa Tax Office